When to Replace Motorcycle Tires, Can a Puncture Be Patched, and Tube vs Tubeless Explained

Replace a motorcycle tire when the tread has worn down to the wear bars, the sidewall is cracking, or the rubber has gone so hard you cannot press a fingernail into it, even if some tread is left. A small nail hole in the middle of the tread can usually be patched; a cut in the sidewall or a large hole means a new tire. This guide covers the checks, the repair options and what Thai tire shops charge, so you know what to ask for before you ride in. If you are browsing used bikes on Talata, a marketplace that puts listings from many sellers in one place so you can compare them side by side, the same checks work on any bike you are considering. (The advice is the same whether you call it a motorcycle tire or a motorbike tyre.)
How long do motorcycle tires last in kilometers and years?
A motorcycle tire typically lasts around 1–2 years or 10,000–20,000 km, and up to 3–5 years or 40,000–50,000 km, depending on the rubber compound and how the bike is used. Softer tires grip better but wear faster; harder ones last longer and carry more weight. Treat those numbers as a rough guide. A scooter that does 10 km to the office and one that delivers food all day will need tires at very different times.
Tires also age with time, not just distance. A bike that sat parked for a year can still show full tread while the rubber underneath has hardened and started to crack, and that tire grips badly, especially on wet roads. Michelin recommends having any tire that is five years old or more checked by a professional every year, and replacing a tire that has never been changed in ten years, even if it looks fine and has not reached the wear limit.
What makes motorcycle tires wear out faster?
The usual causes are carrying a passenger or heavy loads every day, riding all day for delivery or taxi work, running low pressure for weeks, hard braking and acceleration, and parking in full sun. Pressure is the one people forget. Too little air wears the shoulders of the tire; too much wears the center strip first. If you are not sure what your bike needs, see our guide to motorcycle tire pressure in Thailand.
Where do you find the manufacture date on a tire?
It is on the sidewall: the last four digits of the DOT code. The first two are the week and the last two are the year, so 2324 means week 23 of 2024. Car and motorcycle tires use the same code, so once you have found it on one tire, you can read it on any other.
What are the signs that a motorcycle tire needs replacing?
With the bike parked, this takes less than a minute. Look at both tires, because the front and rear rarely wear at the same rate.
The tread has worn down to the wear bars
Inside the main grooves there are small raised bars of rubber, the tread wear indicators. Thai mechanics call them "saphan yang", the tire bridge. When the tread surface has worn level with these bars, the tire is finished and should be replaced.
The bars sit about 0.8 mm above the bottom of the groove, and Michelin advises replacing the tire before the tread gets that low, because wet grip drops sharply after that point. Yamaha considers tread that is still around 3–4 mm deep perfectly usable. Once the grooves get shallower than that, start budgeting for a new tire.
The sidewall is cracked or the rubber has gone hard
Press a fingernail into the tread. If it sinks in, the rubber is still soft enough. If the surface is too hard to mark, the tire has reached the end of its life, even with tread left. Fine cracks across the sidewall mean the same thing and are common on old tires or bikes parked outdoors.
There is a bulge, a lump or a tear
A bulge that should not be there, or a cut deep enough to show the fabric layer inside, means the internal structure is damaged. Do not ride on it and do not try to patch it. That tire has to be replaced.
It keeps losing air, or the bike feels wobbly
If you top up the air and it is low again a few days later with no nail in sight, the cause may be an aging tire, a worn valve, or a bead that is not sealing against the rim. A vibration, a heavy or vague feel in corners, or a wavy tread surface usually shows up on tires that are nearly worn out. Let a tire shop decide whether it is the tire or just the valve.
What is the difference between a tube, a tube-type tire and a tubeless tire?
The tire is the part you see touching the road, with the tread and sidewalls. An inner tube is a separate rubber tube inside the tire that holds the air, used with tube-type tires (marked TT). A tubeless tire (marked TL) holds air on its own, because its bead seals tightly against the rim and no tube is needed.
In everyday riding, the difference shows up when you get a puncture. A tubeless tire often loses air slowly, while an inner tube usually goes flat quickly once it is pierced. Both use the same pressure figures; our pressure guide covers that.
How do you tell whether your bike uses tubes or tubeless tires?
The easiest way is the sidewall: tubeless tires say TUBELESS or TL, tube-type tires say TT or TUBE TYPE. You can also look at the wheels. Almost every bike with wire spoke wheels needs inner tubes, because the spoke holes in the rim cannot hold air. Spoke wheels only run tubeless if they are a sealed design that the manufacturer approves. Most bikes with alloy (cast) wheels use tubeless tires. If you are still unsure, check the owner's manual or ask the shop.
Do you need a new inner tube when you replace the tire?
It is not required, but most mechanics recommend it if the old tube has several patches or has been in there a long time. A tube is cheap compared with the labor of taking the wheel off, and if the old tube fails a few weeks later, you pay for that labor again. A newish tube that has never been patched can stay.
Can a punctured motorcycle tire be patched, or does it need replacing?
It can be patched when the hole is small and in the middle of the tread. Michelin says the repairable area is roughly the central three quarters of the tread width, with a hole no wider than 6 mm on standard tires or 3 mm on high-speed ZR tires. Holes in the shoulder or sidewall cannot be repaired, and a tire should not be patched more than twice.
Which type of tire patch suits your bike?
Thai tire shops (look for "pa yang" on the sign) offer the methods below. Prices are rough ranges per puncture published by Thai shops as of November 2026; every shop charges a little differently.
| Repair method | Works on | Wheel removed? | How durable | Typical price per puncture |
|---|---|---|---|---|
| Plug ("worm" or string plug) | Tubeless tires | No | Fastest, but can leak again if the hole does not fit the plug; best as a temporary fix | 70–100 THB |
| Cold patch (rubber patch glued inside) | Tubeless tires and inner tubes | Yes | Seals well but does not handle high heat or pressure; not for large holes | 70–100 THB |
| Hot patch / vulcanized "steam" patch | Tubeless tires and inner tubes | Yes | The strongest seal, suits any bike, but takes longer | 150–200 THB (some shops up to about 300 THB) |
On a bike with inner tubes, the repair is done on the tube; plugs are for tubeless tires only. Tire makers rate a mushroom-shaped plug fitted from inside the tire by a technician as the best repair. Plug kits used from the outside, or sealant pushed in through the valve, count as temporary fixes, and the tire should be checked from the inside afterwards.
Which punctures should not be patched?
Get a new tire if any of these apply:
- The hole is in the sidewall or the shoulder
- The hole is bigger than the limits above, or it is a long cut
- The tire already has two repairs
- The bead (the edge that seals against the rim) is damaged
- The bike was ridden a long way on a flat, which wears the inside of the tire
- The tread is already close to the wear bars, so a patch would not buy much time
The last one is about value; the others are about safety. If a shop refuses to patch and says the tire must be replaced, it is often because the damage falls into one of these cases. Ask why before you assume they are upselling.
What should you do if you get a flat on the road?
Do not keep riding on a completely flat tire, especially one with an inner tube. The tube will tear and the rim can get dented, turning a small patchable hole into a new tube and a new tire. Push the bike to the nearest shop or call a mobile tire repair service. A tubeless tire with a nail still in it may lose air slowly, but that does not make it safe to keep riding: slow down, avoid sudden braking or swerving, then stop somewhere safe to check it or head to the closest shop. If the tire leaks slowly and you cannot find why, the troubleshooting in our article on tire leak causes and fixes applies here too, although it is written for cars.
Can you replace just one motorcycle tire, or do you need to replace both?

Replacing one tire is fine and very common, because front and rear wear at different rates. The rear carries more of the rider's weight and all of the engine's drive, so it usually wears out first. The new tire should match the size in your bike's specification and suit the other tire: do not pair an off-road tire with a road tire, for example. Michelin recommends running the same brand and range front and rear for the best performance, so when you replace one, pick the same model as the other tire or something very close.
If both tires are worn to a similar level, changing them together saves a second trip to the shop, but it is not required.
How do you read a motorcycle tire size?
Most motorbike tyre sizes are written like 80/90-14. The first number is the tire width in millimeters, the second is the sidewall height as a percentage of that width, and the last is the rim diameter in inches. Some older tires use a format like 2.50-17, where 2.50 is the width in inches and 17 is still the rim size.
The safest approach is to copy the size from your owner's manual or the sticker on the bike. Front and rear sizes are usually different, so check each one. If you want a wider tire for looks, talk to the mechanic first and make sure it does not rub against the mudguard or swingarm. If the new tire is a different size from the original, our pressure guide explains what to inflate it to.
How much does motorcycle tire replacement cost in Thailand?
The cost has three parts: the tire, the inner tube if your bike uses one, and the fitting labor. Knowing what each part costs makes it easier to tell whether a quote is fair.
Typical prices for tires, tubes and labor
These are online prices for the parts as of November 2026, plus typical fitting charges, as a benchmark.
| Item | Typical price |
|---|---|
| Inner tube, 14 or 17 inch | about 45–80 THB each |
| Tube-type tire for a small bike, 17 inch (e.g. 70/90-17, 80/90-17) | about 270–490 THB, depending on brand |
| Tubeless scooter tire, 14 inch (e.g. 80/90-14) | about 300–950 THB, depending on brand |
| Fitting labor when you bring your own tire | about 100–300 THB per tire; city shops, automatic scooters and tubeless tires tend to cost more |
| Big-bike rear tire (e.g. 180/55-17) | about 2,000 to over 10,000 THB each, depending on brand and model |
If you buy the tire at the shop, many shops discount or include the fitting, which is why shop prices often look higher than online prices. If you get an all-in quote, ask for the tire and labor to be listed separately so you can compare shops.
Buy online and pay a shop to fit it, or do it yourself?
Buying a tire online and paying a shop to fit it works and is often cheaper, but some shops charge more for fitting tires they did not sell, and a few will not do it at all. Call first, and double-check the size and the TL or TT marking before you order.
You can do it yourself if you have tire levers, a pump and some experience removing wheels. Rear wheels on automatic scooters and wheels with disc brakes are harder than they look, though, and a tire fitted the wrong way round or with the bead not seated properly is far more dangerous than the labor you saved. For most riders, a shop is the better choice.
Buying a used bike with worn tires: how much should you budget?
If both tires on a bike you are looking at are close to the wear bars, or old enough that the rubber has hardened, count a pair of new tires plus fitting as a cost you will pay soon after buying. For a small bike such as a Honda Wave 110i, riders report paying around 400-something baht for the front and 500-something for the rear, tire and tube including labor, so roughly 1,000 THB for both. Use that number when you negotiate with the seller. For everything else to inspect, see what to check when buying a used motorcycle.
What should you watch out for after fitting new tires?
New tires leave the factory with a thin slippery film, so they do not grip fully at first. Michelin recommends riding gently for about the first 100 km: no hard acceleration or braking and no deep lean angles until the surface has scuffed in. The same applies when you replace only one tire.
Before you leave the shop, have the mechanic set the pressure to the figure on your bike's sticker, check that the valve cap is on, and spin the wheel to make sure nothing rubs. Check the pressure again a few days later. If it drops faster than normal, go back and have the bead and valve checked. For the rest of your regular maintenance, see our motorbike service schedule.
Before you decide to patch or replace, run through the checks above, ask the shop to price the tire and the labor separately, and compare two or three places. If you are thinking about a different bike, or about selling the one you have, take your time with the listings and contact sellers through Talata once you find the right one.
Why buy or sell a used motorcycle on Talata?
For buyers, Talata puts used motorcycle listings from many sellers in one place, so you can filter by brand, model and price and compare bikes easily. Before you arrange a viewing, message the seller and ask what year the tires were made, when they were last changed, and whether the bike runs tubes or tubeless. If you are hunting for alloy wheels or other used motorcycle parts, the motorcycle parts and accessories category has listings too.
For sellers, posting a listing is straightforward. Include the tire details, the manufacture year and when they were last replaced, plus a clear photo of the tread, and buyers can decide faster with less haggling. When you are ready, get started on Talata.

Frequently Asked Questions
How long does it take to change a motorcycle tire?
Most of the time you can wait at the shop: a mechanic with the right tools usually finishes in about 5–15 minutes per wheel. Wheel balancing or a big bike takes longer. If the shop has to order your size, you may need to come back another day.
How long does a patched motorcycle tire last?
If it was patched properly and the hole was in a repairable spot, the tire can usually be used until it wears out normally. A plug is the repair most likely to leak again, so if you have one, ask a shop to check the tire from the inside when you get the chance. Once a tire has two repairs, replace it next time instead of patching.
How much does a mobile tire repair service charge?
Mobile repair costs more than patching at a shop and varies a lot by area and time of day. Shops that publish prices range from about 150 THB to start, up to around 650 THB for a motorcycle including the patch, and night call-outs may add an overtime charge. Agree on the total price when you call, and say whether the bike has tubes or tubeless tires so the mechanic brings the right kit.
Can you put an inner tube in a tubeless tire after a puncture?
Do not do it on your own, especially on a bike with alloy wheels and tubeless tires, because an added tube can rub and heat up and become riskier than the original setup. Some tubeless tires can take a tube when fitted to a tube-type rim and the tire maker allows it, so let a mechanic check the bike and tire specifications first. If the damage is in the sidewall or the tire is torn, a tube will not help and the tire needs replacing.
How long does a motorcycle inner tube last?
There is no fixed lifespan set by manufacturers; it depends on how many times it has been patched, whether it is the right size, and how the bike is used. A tube with several patches, rubber that is starting to feel brittle, or a worn valve should be replaced the next time the tire comes off, because it costs little compared with removing the wheel again.
Where should you change your motorcycle tires: a dealer or a tire shop?
A dealer service center is a good choice if you want the factory-specified tire or your bike is still on its scheduled services. Independent tire shops usually stock more brands and are often cheaper. Either works, as long as the shop matches the size to your bike and itemizes the tire and labor.
I bought a used bike and the tires are a different size from stock. Do I need to change them back?
If the tires do not rub anywhere, the bike handles normally and the size is within what the bike can take, you can ride them until they wear out and go back to the stock size next time. If they are wide enough to rub the mudguard or make the steering feel odd, replace them now.
Is it worth putting new tires on a motorcycle before selling it?
It is worth it when the tires are clearly worn out, because buyers will knock off more than the real cost of new tires. If the tires still have half their tread or more, leave them: state the tire year and add a clear photo of the tread to your listing. Being upfront like this usually sells a bike faster than fitting cheap tires to make it look fresh.




